Thin sleeves to insulate screws (no more tape)

[danielfp248]

Hey Everyone. I designed and printed some PLA sleeves to go over M6 screws so that you don't need to use tape on the screws anymore with the kit. The tape is often hard to properly wrap around and imo has to be changed quite often, so this should improve the design. I printed these on a Prusa Core One using a 0.4mm diameter nozzle. The screws don't come into contact with active material, so you can use PLA for this (doesn't have to be PP, although this should also work).

You can get the STL here:

https://www.dropbox.com/scl/fi/r9h95p92dyt648aajktkm/sleeve_for_screws_kit.stl?rlkey=sxoenr3p8g1qe3ysgc0318j7z&dl=0

You can print these in "vase mode" so that you have no stitching marks. Let me know what your experience is with other printers!